ZyXEL Communications ZyWALL USG 2000 Instrukcja Użytkownika Pobierz pdf (Strona 18)

ZyXEL – ZyWALL USG Support Notes

b. Add WAN trunk for HTTP traffic — Set WAN2_ppp as Active mode,

while setting WAN1 as Passive mode.

c. Use SYSTEM_DEFAULT_WAN_TRUNK to do load balancing for all other

traffic.

Step 2. Go to Advanced > Policy Route, add a policy route to route HTTP traffic

out primarily through WAN2, leaving WAN1 as backup.

Criteria:

IP Protocol: TCP (6)

Application: Custom

Source IP: Choose interface LAN. Address range: 192.168.1.0~192.168.1.255

Source port: Any

Destination IP: Any

Destination Port: 80

Action Applies to: Matched packets.

Routing Action:

Choose WAN interface WAN2, and enable Use another interface when the

specified WAN interface is not available.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 87 88

Brak uwag

ZyXEL Communications ZyWALL USG 2000 Instrukcja Użytkownika Strona 18