Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Instrukcja Użytkownika Pobierz pdf (Strona 182)

Appendix H Text File Based Auto Configuration

ZyXEL NWA-1100 User’s Guide

182

" If adjacent APs use the same configuration file, you should leave out the

channel setting since they could interfere with each other’s wireless traffic.

Auto Configuration by DHCP

A DHCP response can use options 66 and 67 to assign a TFTP server IP address and a

filename. If the AP is configured as a DHCP client, these settings can be used to perform auto

configuration.

If this feature is enabled and the DHCP response provides a TFTP server IP address and a

filename, the AP will try to download the file from the specified TFTP server. The AP then

uses the file to configure wireless LAN settings.

" Not all DHCP servers allow you to specify options 66 and 67.

Configuration Via SNMP

You can configure and trigger the auto configuration remotely via SNMP.

Use the following procedure to have the AP download the configuration file.

Verifying Your Configuration File Upload Via SNMP

You can use SNMP management software to display the configuration file version currently

on the device by using the following MIB.

Table 68 Auto Configuration by DHCP

COMMAND DESCRIPTION

wcfg autocfg dhcp [enable |

disable]

Turn configuration of TFTP server IP address and

filename through DHCP on or off.

Table 69 Configuration via SNMP

STEPS MIB VARIABLE VALUE

Step 1 pwTftpServer Set the IP address of the TFTP server.

Step 2 pwTftpFileName Set the file name, for example, g3000hcfg.txt.

Step 3 pwTftpFileType Set to 3 (text configuration file).

Step 4 pwTftpOpCommand Set to 2 (download).

Table 70 Displaying the File Version

ITEM OBJECT ID DESCRIPTION

pwCfgVersion 1.3.6.1.4.1.890.1.9.1.2 This displays the current configuration file version.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 205 206

Brak uwag

Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Instrukcja Użytkownika Strona 182