Zyxel-communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series Instrukcja Użytkownika Strona 143

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 286
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 142
Prestige 660RU-Tx Series User’s Guide
Chapter 18 Remote Node Configuration 142
CHAPTER 18
Remote Node Configuration
This chapter covers remote node configuration.
18.1 Remote Node Setup Overview
This section describes the protocol-independent parameters for a remote node. A remote node
is required for placing calls to a remote gateway. A remote node represents both the remote
gateway and the network behind it across a WAN connection. When you use menu 4 to set up
Internet access, you are configuring one of the remote nodes.
You first choose a remote node in Menu 11- Remote Node Setup. You can then edit that
node’s profile in menu 11.1, as well as configure specific settings in three submenus: edit IP
and bridge options in menu 11.3; edit ATM options in menu 11.6; and edit filter sets in menu
11.5.
18.2 Remote Node Setup
This section describes the protocol-independent parameters for a remote node.
18.2.1 Remote Node Profile
To configure a remote node, follow these steps:
1 From the main menu, enter 11 to display Menu 11 - Remote Node Setup.
2 When menu 11 appears, as shown in the following figure, type the number of the remote
node that you want to configure.
Przeglądanie stron 142
1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 285 286

Komentarze do niniejszej Instrukcji

Brak uwag