Zyxel-communications Internet Security Gateway ZyWALL 100 Instrukcja Użytkownika Pobierz pdf (Strona 113)

ZyWALL 100 Internet Security Gateway

11-4 IP Static Route Setup

Table 11-1 IP Static Route Menu Fields

FIELD DESCRIPTION

Route # This is the index number of the static route that you chose in menu 12.

Route Name Enter a descriptive name for this route. This is for identification purposes only.

Active This field allows you to activate/deactivate this static route.

Destination IP

Address

This parameter specifies the IP network address of the final destination. Routing is

always based on network number. If you need to specify a route to a single host, use

a subnet mask of 255.255.255.255 in the subnet mask field to force the network

number to be identical to the host ID.

IP Subnet

Mask

Enter the IP subnet mask for this destination.

Gateway IP

Address

Enter the IP address of the gateway. The gateway is an immediate neighbor of your

ZyWALL that will forward the packet to the destination. On the LAN, the gateway

must be a router on the same segment as your ZyWALL; over the WAN, the gateway

must be the IP address of one of the remote nodes.

Metric Metric represents the “cost” of transmission for routing purposes. IP routing uses hop

count as the measurement of cost, with a minimum of 1 for directly connected

networks. Enter a number that approximates the cost for this link. The number need

not be precise, but it must be between 1 and 15. In practice, 2 or 3 is usually a good

number.

Private This parameter determines if the ZyWALL will include the route to this remote node in

its RIP broadcasts. If set to Yes, this route is kept private and not included in RIP

broadcast. If No, the route to this remote node will be propagated to other hosts

through RIP broadcasts.

Once you have completed filling in this menu, press [ENTER] at the message “Press ENTER to

Confirm…” to save your configuration, or press [ESC] to cancel.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 355 356

Brak uwag

Zyxel-communications Internet Security Gateway ZyWALL 100 Instrukcja Użytkownika Strona 113