Zyxel-communications ISDN Internet Access Router 202H Plus Instrukcja Użytkownika Pobierz pdf (Strona 5)

Prestige 202H Plus Quick Start Guide

LED COLOR STATUS DESCRIPTION

On The Prestige is receiving power and functioning properly. Green

Blinking The Prestige is rebooting.

Red On Power to the Prestige is too low.

PWR/SYS

Off The system is not ready or has malfunctioned.

Green On The Prestige has a successful 10Mb Ethernet connection.

Blinking The Prestige is sending/receiving data.

LAN 1-4

Amber On The Prestige has a successful 100Mb Ethernet connection.

On The ISDN link is connected to an ISDN switch and ready to send or receive

data.

ISDN LNK Green

Off The ISDN link is not connected to an ISDN switch or has not yet initialized.

On The ISDN B1(B2) line is sending or receiving data. ISDN B1, B2 Green

Off The ISDN B1(B2) line is not sending or receiving data..

On The telephone(s) connected to this port is (are) in use.

Blinking The telephone(s) connected to this port is (are) ringing.

Phone 1-2 Green

Off The telephone(s) connected to this port is (are) not in use.

3 Setting Up Your Computer’s IP Address

Skip this section if your computer is already set up to accept a dynamic IP address. This is

the default for most new computers.

The Prestige is already set up to assign your computer an IP address. Use this section to set up your computer to receive

an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range with a subnet mask of

255.255.255.0. This is necessary to ensure that your computer can communicate with your Prestige.

Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed on computers

using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Brak uwag

Zyxel-communications ISDN Internet Access Router 202H Plus Instrukcja Użytkownika Strona 5