Zyxel-communications P-2802H(W)(L)-I Series Instrukcja Użytkownika Pobierz pdf (Strona 75)

Chapter 5 Status Screens

P-2802H(W)(L)-I Series User’s Guide

System Status

System

Uptime

This field displays how long the ZyXEL Device has been running since it last

started up. The ZyXEL Device starts up when you plug it in, when you restart it

(Maintenance > Tools > Restart), or when you reset it (see Section 1.6 on page

41).

Current Date/

Time

This field displays the current date and time in the ZyXEL Device. You can change

this in Maintenance > System > Time Setting.

System Mode This displays whether the ZyXEL Device is functioning as a router or a bridge.

The ZyXEL Device is always in routing mode when the first Ethernet port is the

WAN port to allow Internet access via an Ethernet connection to a broadband

modem or router.

WAN Interface This displays whether the ZyXEL Device is using the VDSL port for Internet

access (VDSL) or using the first Ethernet port as the WAN port (Ethernet).

CPU Usage This field displays what percentage of the ZyXEL Device’s processing ability is

currently used. When this percentage is close to 100%, the ZyXEL Device is

running at full load, and the throughput is not going to improve anymore. If you

want some applications to have more throughput, you should turn off other

applications (for example, using QoS; see Chapter 17 on page 239).

Memory

Usage

This field displays what percentage of the ZyXEL Device’s memory is currently

used. Usually, this percentage should not increase much. If memory usage does

get close to 100%, the ZyXEL Device is probably becoming unstable, and you

should restart the device. See Section 23.6 on page 309, or turn off the device

(unplug the power) for a few seconds.

Interface Status

Interface This column displays each interface the ZyXEL Device has.

Status This field indicates whether or not the ZyXEL Device is using the interface.

For the DSL interface, this field displays Down if you're using Ethernet

encapsulation or the DSL port is disabled and Down (line is down), Up (line is up

or connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop

(dropping a call) if you're using PPPoE encapsulation.

For the LAN interface, this field displays Up when the ZyXEL Device is using the

interface and Down when the ZyXEL Device is not using the interface.

For the WLAN interface, it displays Active when WLAN is enabled or Inactive

when WLAN is disabled.

Rate For the LAN interface, this displays the port speed and duplex setting.

For the DSL interface, it displays the downstream and upstream transmission rate

or N/A when the DSL port is disabled.

For the WLAN interface, it displays the maximum transmission rate when WLAN is

enabled or N/A when WLAN is disabled.

Summary

Client List Click this link to view current DHCP client information. See Section 7.6 on page

97.

AnyIP Table Click this link to view a list of IP addresses and MAC addresses of computers,

which are not in the same subnet as the ZyXEL Device. See Section 5.2 on page

76.

WLAN Status Click this link to display the MAC address(es) of the wireless stations that are

currently associating with the ZyXEL Device. See Section 5.3 on page 77.

VPN Status Click this link to view the ZyXEL Device’s current VPN connections. See Section

14.16 on page 205.

Table 15 Status Screen

LABEL DESCRIPTION

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 417 418

Komentarze do niniejszej Instrukcji

Brak uwag

Zyxel-communications P-2802H(W)(L)-I Series Instrukcja Użytkownika Strona 75

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Zyxel-communications P-2802H(W)(L)-I Series