Zyxel-communications P-660HW-D Series Instrukcja Użytkownika Pobierz pdf (Strona 122)

P-660HW-D Series User’s Guide

121 Chapter 7 Wireless LAN

3 In the wireless client, you see this screen if it can't find an OTIST-enabled AP (with the

same Setup key). Click OK to go back to the ZyXEL utility main screen.

Figure 67 No AP with OTIST Found

• If there is more than one OTIST-enabled AP within range, you see a screen asking you to

select one AP to get settings from.

7.5.3 Notes on OTIST

1 If you enabled OTIST in the wireless client, you see this screen each time you start the

utility. Click Ye s for it to search for an OTIST-enabled AP.

Figure 68 Start OTIST?

2 If an OTIST-enabled wireless client loses its wireless connection for more than ten

seconds, it will search for an OTIST-enabled AP for up to one minute. (If you manually

have the wireless client search for an OTIST-enabled AP, there is no timeout; click

Cancel in the OTIST progress screen to stop the search.)

3 When the wireless client finds an OTIST-enabled AP, you must still click Start in the AP

OTIST web configurator screen or hold in the RESET button (for one to five seconds)

for the AP to transfer settings.

4 If you change the SSID or the keys on the AP after using OTIST, you need to run OTIST

again or enter them manually in the wireless client(s).

5 If you configure OTIST to generate a WPA-PSK key, this key changes each time you run

OTIST. Therefore, if a new wireless client joins your wireless network, you need to run

OTIST on the AP and ALL wireless clients again.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 338 339

Brak uwag

Zyxel-communications P-660HW-D Series Instrukcja Użytkownika Strona 122