Zyxel-communications Prestige P-870HW-51a v2 Instrukcja Użytkownika Pobierz pdf (Strona 137)

Chapter 11 Quality of Service (QoS)

P-870HW-51a v2 User’s Guide

137

11.6 Technical Reference

The following section contains additional technical information about the ZyXEL

Device features described in this chapter.

MAC Mask Type the mask for the specified MAC address to determine which bits

a packet’s MAC address should match.

Enter “f” for each bit of the specified source MAC address that the

traffic’s MAC address should match. Enter “0“ for the bit(s) of the

matched traffic’s MAC address, which can be of any hexadecimal

character(s). For example, if you set the MAC address to

00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a

MAC address of 00:13:49:12:34:56 matches this criteria.

You cannot put a “0” pair before an “f” pair. For example,

ff:ff:00:ff:00:00 is invalid.

Destination

Address Enter the destination IP address in dotted decimal notation.

Subnet Mask Enter the destination subnet mask.

Port If you select a protocol type, enter the port number(s) of the

destination. 0 means any destination port number.

MAC Address Enter the destination MAC address of the packet.

MAC Mask Type the mask for the specified MAC address to determine which bits

a packet’s MAC address should match.

Enter “f” for each bit of the specified destination MAC address that the

traffic’s MAC address should match. Enter “0“ for the bit(s) of the

matched traffic’s MAC address, which can be of any hexadecimal

character(s). For example, if you set the MAC address to

00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a

MAC address of 00:13:49:12:34:56 matches this criteria.

You cannot put a “0” pair before an “f” pair. For example,

ff:ff:00:ff:00:00 is invalid.

Others

Protocol Select the protocol (service type) from TCP, UDP, ICMP or IGMP.

Differentiated

Services Code

Point (DSCP)

Select a DSCP value from the drop-down list box.

default represents the default DSCP value 000000 or 0x00.

802.1p Priority Select a priority level (between 0 and 7) from the drop down list box.

"0" is the lowest priority level and "7" is the highest.

Back Click Back to return to the previous screen without saving.

Apply Click Apply to save your changes back to the ZyXEL Device.

Cancel Click Cancel to begin configuring this screen afresh.

Table 41 QoS Class Configuration (continued)

LABEL DESCRIPTION

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 275 276

Komentarze do niniejszej Instrukcji

Brak uwag

Zyxel-communications Prestige P-870HW-51a v2 Instrukcja Użytkownika Strona 137

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Zyxel-communications Prestige P-870HW-51a v2