ZyXEL Communications U-1496 series Instrukcja Użytkownika Pobierz pdf (Strona 44)

=1; 2 stop bits.

(1,0) =0; Even parity.

=1; Odd parity.

=2; No parity.

S16 Test status register, default = 0

=0; No test in progress. (Default)

=1; Analog loopback test in progress.

=2; Reserved.

=3; Local digital loopback test in progress.

=6; Remote digital loopback test in progress.

=7; Remote digital loopback with self-test in progress.

=8; Analog loopback with self-test in progress.

S17 Bit-mapped register, default = 18

*In (7,6) =0; AT command set.

=1; V.25bis command set.

=2; Dumb model

D (5) =0; Normal dial

DR =1; Reverse dial, answer mode on line

*Pn (4,3,2,1) =0-15; Set leased line transmission power level. (See also

S35b3)

*Sn (0) =0; Disable secondary channel.

=1; Enable secondary channel. (See also S42b0)

S18 Same value format as S20. If non-zero, forces the modem to use the fixed baud rate

indicated by this value when answering. A value of zero disables this function.

S19 Modem connection mode, default=0

&Nn =0; Multi-Auto, auto negotiate highest possible link rate. ( ZyX

19200, ZyX 16800, V.32bis 14400/12000/7200, V.32 9600T/9600/7200T/4800, V.22bis

2400/1200, V.22 1200, BELL 212A 1200, V.17FAX 14400/12000/9600/7200, V.29FAX

9600/7200, V.27terFAX 4800/2400, cellular modes)

=1; V.33 14400/12000.

=2; V.33 12000.

=3; V.32 9600T/9600/7200T/4800.

=4; V.32 9600/7200T/4800.

=5; V.32 4800.

=6; V.29 9600.

=7; V.29 7200.

=8; V.29 4800.

=9; V.27bis 4800.

=10; V.27bis 2400.

=11; V.26bis 2400.

=12; V.23 1200/75.

=13; V.23 600/75.

=14; V.22bis 2400/1200.

=15; V.22 1200.

=16; V.21 300.

=17; V.32bis 14400/12000/9600/7200/4800.

=18; V.32bis 12000/9600/7200/4800.

=19; V.32bis 7200/4800.

=24; Bell 212A 1200.

=25; Bell 103 300.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 107 108

Komentarze do niniejszej Instrukcji

Brak uwag

ZyXEL Communications U-1496 series Instrukcja Użytkownika Strona 44

Komentarze do niniejszej Instrukcji