ZyXEL Communications A-6000 Podręcznik Użytkownika Strona 24
- Strona / 46
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
A-6000 High Speed, Long Range Ethernet Wireless Bridge
Hardware Installation 2-9
2.3 Indoor Unit Installation
After the outdoor unit installation is completed, you may follow the procedures below to install the indoor unit.
1. Choose an appropriate place for the network/power injector. You might hang it on the wall or just place it on the desk.
Connect the other end of category-5 cable to the “TO RADIO” RJ-45 connector of network/power injector.
2. Connect one end of Ethernet cable to the “TO LAN” RJ-45 port of the network/power injector. Connect the other end of
Ethernet cable to the workstation directly or through a switch/hub/router.
3. Connect the power jack of switching power adaptor to the power port labeled as ” POWER” on the network/power injector.
Figure 2-21 Cable Connections of Network/Power Injector
2.4 Initializing the A-6000
1. When plugging the switching power adapter into the 110V/220V wall outlet, the LED named PWR on the network/power
injector will light on.
2. When the power and signal connection to outdoor unit are complete, the SYS LED of the network/power injector will light
on.
2.5 Antenna Alignment
To maximize the signal quality for A-6000 system , you had better align the directional antennas for both BU and RU. To
perform the antenna alignment, you can use AK-100 which will show you the signal strength and link quality on its panel. The
system data rate will drop to 6Mbps while using AK-100 to align the A-6000. After the alignment is completed, it is required to
reboot both BU and RU for regular data rate recovery. To do the alignment, follow the steps as below:
1. Open the cover of the console port labeled
on the bottom of the remote unit/basestation unit (RU/BU) and well
reserve the cover.
2. Connect the RS-232 cable to this console port.
- Ver 1.0 1
- January, 2005 1
- Copyright 3
- Interference Statement 4
- ZyXEL Limited Warranty 6
- Customer Support 7
- Table of Contents 9
- List of Figures 10
- List of Tables 11
- 1.2 A-6000 product types 13
- 1.5 Benefits of the A-6000 13
- A-6000 14
- Installation 16
- 2.2 Hardware Installation 20
- 2.3 Indoor Unit Installation 24
- 2.4 Initializing the A-6000 24
- 2.5 Antenna Alignment 24
- 2.6 Indoor Interface Unit 25
- 2.7 System LED Indication 25
- 2.8 RSSI LED Indication 26
- 2.9 Alignment Tools 26
- Chapter 3 Initial Setup 27
- 3.2.3. System Configuration 30
- 3.2.6. System Log Windows 32
- Initial Setup 3-7 33
- Figure 3-8 System Log Windows 33
- Chapter 4 CLI commands 34
- Glossary of Terms 39
Powiązane produkty i podręczniki dla Networking ZyXEL Communications A-6000
(20 strony)
(20 strony)
(140 strony)Panasonic SCHC37DBEW manuály
Uživatelské manuály a uživatelské příručky pro DVD přehrávače Panasonic SCHC37DBEW.
Poskytujeme manuály pdf Panasonic SCHC37DBEW ke stažení zdarma podle typů dokumentů:
Komentarze do niniejszej Instrukcji