ZyXEL Communications ES-2024 Series Podręcznik Użytkownika Strona 160

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 284
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 159
ES-4024A User’s Guide
Chapter 25 RIP 159
CHAPTER 25
RIP
This chapter shows you how to configure RIP (Routing Information Protocol).
25.1 Overview
RIP (Routing Information Protocol allows a routing device to exchange routing information
with other routers. The Direction field controls the sending and receiving of RIP packets.
When set to:
Both - the ES-4024A will broadcast its routing table periodically and incorporate the RIP
information that it receives.
Incoming - the ES-4024A will not send any RIP packets but will accept all RIP packets
received.
Outgoing - the ES-4024A will send out RIP packets but will not accept any RIP packets
received.
None - the ES-4024A will not send any RIP packets and will ignore any RIP packets
received.
The Version field controls the format and the broadcasting method of the RIP packets that ES-
4024A sends (it recognizes both formats when receiving). RIP-1 is universally supported; but
RIP-2 carries more information. RIP-1 is probably adequate for most networks, unless you
have an unusual network topology.
Both RIP-2B and RIP-2M sends the routing data in RIP-2 format; the difference being that
RIP-2B uses subnet broadcasting while RIP-2M uses multicasting.
25.2 Configuring RIP
Click Routing Protocol, RIP in the navigation panel to display the screen as shown. You
cannot manually configure a new entry. Each entry in the table is automatically created when
you configure a new IP domain in the IP Setup screen (refer to the section on IP routing
domain setup).
Przeglądanie stron 159
1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 283 284

Komentarze do niniejszej Instrukcji

Brak uwag