ZyXEL Communications ES-315-F - V3.70 Podręcznik Użytkownika Pobierz pdf (Strona 132)

GS-4012F/4024 User’s Guide

Chapter 18 Classifier 131

Priority Select Any to classify traffic from any priority level or select the second option and specify

a priority level in the field provided.

Ethernet

Type

Select an Ethernet type or select Other and enter the Ethernet type number in

hexadecimal value. Refer to Table 42 on page 132 for information.

Source

MAC

Address

Select Any to apply the rule to all MAC addresses.

To specify a source, select the second choice and type a MAC address in valid MAC

address format (six hexadecimal character pairs).

Port Type the port number to which the rule should be applied. You may choose one port only

or all ports (Any).

Destination

MAC

Address

Select Any to apply the rule to all MAC addresses.

To specify a destination, select the second choice and type a MAC address in valid MAC

address format (six hexadecimal character pairs).

Layer 3

Specify the fields below to configure a layer 3 classifier.

DSCP Select Any to classify traffic from any DSCP or select the second option and specify a

DSCP (DiffServ Code Point) number between 0 and 63 in the field provided.

Protocol

Select an IP protocol type or select Other and enter the protocol number in decimal value.

Refer to Table 43 on page 133 for more information.

You may select Establish Only for TCP protocol type. This means that the switch will pick

out the packets that are sent to establish TCP connections.

Source

Address/

Address

Prefix

Enter a source IP address in dotted decimal notation.

Specify the address prefix by entering the number of ones in the subnet mask.

Socket

Number

Note: You must select either UDP or TCP in the IP Protocol field before

you configure the socket numbers.

Select Any to apply the rule to all TCP/UDP protocol port numbers or select the second

option and enter a TCP/UDP protocol port number.

Destination

Address/

Address

Prefix

Enter a destination IP address in dotted decimal notation.

Specify the address prefix by entering the number of ones in the subnet mask.

Socket

Number

Note: You must select either UDP or TCP in the IP Protocol field before

you configure the socket numbers.

Select Any to apply the rule to all TCP/UDP protocol port numbers or select the second

option and enter a TCP/UDP protocol port number.

Add Click Add to insert the entry in the summary table below and save your changes to the

switch’s run-time memory. The switch loses these changes if it is turned off or loses power,

so use the Save link on the top navigation panel to save your changes to the non-volatile

memory when you are done configuring.

Table 40 Classifier (continued)

LABEL DESCRIPTION

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 362 363

Komentarze do niniejszej Instrukcji

Brak uwag

ZyXEL Communications ES-315-F - V3.70 Podręcznik Użytkownika Strona 132

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ZyXEL Communications ES-315-F - V3.70