ZyXEL Communications IES-612-51A Podręcznik Użytkownika Pobierz pdf (Strona 198)

Chapter 27 RFC 2684 Routed Mode

IES-612-51 User’s Guide

198

27.3 2684 Routed Domain Screen

Use this screen to configure domains for 2684 routed mode traffic. The domain is the range of

IP addresses behind the subscriber’s device (the CPE). This includes the CPE device’s LAN IP

addresses and the IP addresses of the LAN computers.

To open this screen, click Advanced Application, 2684 Routed Mode, Routed Domain.

Figure 100 2684 Routed Domain

Port This field displays the number of the DSL port on which the routed PVC is

configured.

VPI This field displays the Virtual Path Identifier (VPI) The VPI and VCI identify a

channel on this port.

VCI This field displays the Virtual Circuit Identifier (VCI). The VPI and VCI identify a

channel on this port.

IP This field displays the subscriber’s IP address.

DS / US VC Profile This shows which VC profile this channel uses for downstream traffic shaping.

The VC profile for upstream policing also displays if the channel is configured to

use one.

NetMask This field displays the bit number of the subnet mask of the subscriber’s IP

address.

Gateway IP This field displays the IP address of the gateway to which you want to send the

traffic that the system receives from this PVC.

Delete Select an entry’s Delete check box and click Delete to remove the entry.

Clicking Delete saves your changes to the IES-612-51’s volatile memory.

The IES-612-51 loses these changes if it is turned off or loses power, so use the

Config Save link on the navigation panel to save your changes to the non-

volatile memory when you are done configuring.

Cancel Click Cancel to start configuring the screen again.

Table 59 RFC 2684 Routed PVC (continued)

LABEL DESCRIPTION

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 413 414

Brak uwag

ZyXEL Communications IES-612-51A Podręcznik Użytkownika Strona 198