ZyXEL Communications MES-2110 Podręcznik Użytkownika Pobierz pdf (Strona 81)

Chapter 10 Bridge

MES-2110 User’s Guide

The following table describes the labels in this screen.

Table 26 Configuration > Bridge Menu > RSTP Per Port Config

LABEL DESCRIPTION

Port This is the port index number.

Type This is the cable type connected to the port.

Priority (1~255) Configure the priority for each port here.

Priority decides which port should be disabled when more than

one port forms a loop in a switch. Ports with a higher priority

numeric value are disabled first. The allowed range is between 0

and 255 and the default value is 128.

Cost (1~65535) Path cost is the cost of transmitting a frame on to a LAN through

that port. It is recommended to assign this value according to the

speed of the bridge. The slower the media, the higher the cost-

see Table 22 on page 75 for more information.

Edge Select On when the port is connected to an end node (a computer

network card for example).

Select Off when the port is connected to a bridge node.

P2P Select On when the port is connected to one bridge as a Point-to-

Point link type.

Select Off when the port is connected to multiple bridges as a

Shared Medium link type.

Select Auto to have the Switch automatically determine the link

type.

Port Status This shows whether the port is Forwarding or Blocking frame

transmission.

Port Role This shows the port behavior as a Disabled, Alternate, Backup,

Root, Designated or NonStp port.

Undo Click this to restore your last saved settings.

Apply Click this to save your changes.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 183 184

Brak uwag

ZyXEL Communications MES-2110 Podręcznik Użytkownika Strona 81