ZyXEL Communications P-2602R-63 Podręcznik Użytkownika Pobierz pdf (Strona 195)

Prestige 2602R Series User’s Guide

195 Chapter 26 Network Address Translation (NAT)

Figure 118 NAT Example 3

In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address

Mapping Sets. Therefore you must choose the Full Feature option from the Network

Address Translation field (in menu 4 or menu 11.3) in

Figure 119 on page 195.

1 Enter 15 from the main menu.

2 Enter 1 to configure the Address Mapping Sets.

3 Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and

then enter 1 for the Select Rule field. Press [ENTER] to confirm.

4 Select Type as One-to-One (direct mapping for packets going both ways), and enter the

local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as

10.132.50.1 (our first IGA). (See

Figure 120 on page 196).

5 Repeat the previous step for rules 2 to 4 as outlined above.

When finished, menu 15.1.1 should look like as shown in Figure 121 on page 196.

Figure 119 Example 3: Menu 11.3

Menu 11.3 - Remote Node Network Layer Options

IP Options: Bridge Options:

IP Address Assignment= Static Ethernet Addr Timeout (min)= 0

Rem IP Addr: 0.0.0.0

Rem Subnet Mask= 0.0.0.0

My WAN Addr= 0.0.0.0

NAT= Full Feature

Address Mapping Set= 2

Metric= 2

Private= No

RIP Direction= Both

Version= RIP-2B

Multicast= IGMP-v2

IP Policies=

Press ENTER to Confirm or ESC to Cancel:

The following figures show how to configure the first rule

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 348 349

Brak uwag

ZyXEL Communications P-2602R-63 Podręcznik Użytkownika Strona 195