ZyXEL Communications VANTAGE RADIUS 50 Podręcznik Użytkownika Pobierz pdf (Strona 3)

Vantage RADIUS 50 Quick Start Guide

• Wireless station A attempts to communicate with B over the wireless network via C.

• C sends a “request identity” message to A for authentication.

• A replies with identity information, including username and password.

• C communicates with Vantage RADIUS, which checks the user information against its list

of valid accounts and determines whether or not to authenticate A.

• A is authenticated and can communicate with B over the wireless network.

1.2 Required Information

You need the following information from your ISP or network administrator.

Vantage RADIUS Internet Account Information

Your Vantage RADIUS IP Address (if given): __________________

Your Vantage RADIUS IP Address Subnet Mask (if given): __________________

Your default gateway’s IP Address (if given): __________________

Your Primary DNS Server’s IP Address (if given): __________________

Your Secondary DNS Server’s IP Address (if given): __________________

2 Hardware

2.1 Rear Panel

LABEL DESCRIPTION

CONSOLE Only connect this port if your want to configure the RADIUS using the command line

interface; see your User’s Guide for details

Connect the 9-pin male end of the console cable to the console port of the RADIUS and

the other end to a serial port (COM1, COM2 or other COM port) on your computer. Your

computer should have a terminal emulation communications program (such as

HyperTerminal) set to VT100 terminal emulation, no parity, 8 data bits, 1 stop bit, no flow

control and 11500 bps port speed.

POWER 5VDC Use your region’s power adaptor to connect to a power source. See the User’s Guide for

more information.

1 2 3 4 5 6 7 8 ... 16 17

Brak uwag

ZyXEL Communications VANTAGE RADIUS 50 Podręcznik Użytkownika Strona 3