ZyXEL Communications ZYWALL 5 - V4.04 Podręcznik Użytkownika Strona 136

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 181
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 135
ZyXEL Confidential
404XD3C0.docx
136/181
P2000W----DUT---Internat---DUT---P2000W
(2) P2000W and P2000W can not talk to each other in P2P mode.
8. [BUG FIX] 050217478
Symptom: Netbios packet cannot pass through VPN tunnel .
Condition:
(1) Configure a VPN tunnel as follows:
1.1 local subnet mask is 192.168.1.1/255.255.0.0.
1.2 remote subnet mask is 192.169.1.1/255.255.0.0.
1.3 Enable ”Netbois pass through” in local and remote gateway.
1.4 PC A(Local)------ZyWALLA------ZyWALLB---PC B(Remote)192.168.1.1/24
192.169.1.1/24
(2) Establish the VPN tunnel.
(3) In PC A, Search PC B’s computer name.
(4) PC A will send a broadcast packet to search PC B.
(5) ZyWALL A will change destination IP address from 192.168.255.255 to
192.169.255.255 and send to ZyWALL B after encryption. Horever, ZyWALL A
should adjust the UDP checksum but it didn’t.
(6) PCB will drop the received broadcast UDP pcket from PC A due to error UDP
checksum.
9. [BUG FIX] 050214274
Symptom: VPN My IP Addr will resolving fail
Condition:
(1) Add a VPN rule and My IP Address and Remote Gateway Address are domain
type.
(2) Click Dial button, it will fail to build tunnel first time (second time is ok)
(3) Check log will display “Cannot resolve My IP Addr for rule xxx”
10. [BUG FIX] 050304284
Symptom: There is no log for replay packets
Condition:
(1) Enable ”Anti-Replay” function.
(2) Sniffer an ESP packet and replay it.
(3) This ESP packet will be dropped by there is no log.
(4) There should be log to show this action.
11. [BUG FIX] 050316859
Symptom: ZyWALL (3.64) crashes while remote VPN software (ZyWALL VPN
Client) make a VPN connection
Condition:
(1) ZyWALL start negotiating with remote VPN software.
(2) The remote VPN software sends too long VID size.
(3)device will crash.
12. [BUG FIX] 050221575
Symptom: Max. Concurrent Sessions Per Host problem.
Condition:
(1) In eWC->NAT , change Max. Concurrent Sessions Per Host to 300
(2) Use ipscan tool to make session
(3) Log show “192.168.1.33 exceeds the max. number of session per host! “ when
Przeglądanie stron 135
1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 180 181

Komentarze do niniejszej Instrukcji

Brak uwag