ZyXEL Communications ZYWALL 70 - V4.04 Podręcznik Użytkownika Pobierz pdf (Strona 2)

ZyXEL ZyWALL 70 Standard Version

Release 4.04(WM.4)C0

Release Note

Date: Mar. 24, 2009

Supported Platforms:

ZyXEL ZyWALL 70

Versions:

ZyNOS Version: V4.04(WM.4) | 03/24/2009

BootBase: V1.11 | 02/24/2009

Agent Version: V2.1.7(WM.0)base

Notes:

1. Restore to Factory Defaults Setting Requirement: No.

2. The setting of ignore triangle route is on in default ROM FILE. Triangle route

network topology has potential security risks. For further details, please refer

Appendix User Guide for the triangle route issue or.

3. When firewall is turned from "Off" to "On", all connections running through the

ZyWALL will be disconnected.

4. SUA/NAT address loopback feature is enabled on ZyWALL by default, however, if

users do not need it, a C/I command "ip nat loopback off" could turn it off.

5. In WLAN configuration, a switch for enable / disable WLAN is added. The default

value is “disable” since WLAN without any security setting is vulnerable. Please

configure MAC filter, WEP and 802.1X when you enable WLAN feature.

6. When UPnP is on, and ZyWALL is rebooted, Windows XP may not detect it.

Disconnecting and reconnecting the network wire again will solve this problem.

7. For ZW5/35, the default port roles are LAN. For ZW70, the default port roles are

DMZ.

8. In bridge mode, If LAN side DHCP clients want to get DHCP address from WAN

side DHCP server, you need to turn on the firewall rule for BOOT_CLIENT service

type in WANÆLAN direction.

9. Under Bridge Mode, all LAN ports will behave as a hub, and all DMZ ports will also

behave as another hub.

10. For users using the default ROMFILE in former release, please remove “ip nat

session 1300” from autoexec.net by CI command “sys edit autoexec.net”. (Upgrade

from 3.62)

1 2 3 4 5 6 7 ... 111 112

Brak uwag

ZyXEL Communications ZYWALL 70 - V4.04 Podręcznik Użytkownika Strona 2