ZyXEL Communications ZyWALL 70 Informacje Techniczne Strona 205

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 298
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 204
ZyWALL 1050 Support Notes
205
All contents copyright (c) 2006 ZyXEL Communications Corporation.
To make this scenario works the follow the configuration steps as stated below:
1) Login the ZyWALL 1050 GUI and setup the ge2 interface for internet connection and
manually assign a static IP. The configuration path is ZyWALL 1050 > Configuration >
Network > Interface > Edit > ge2
Please use this same method to assign IP for the LAN and DMZ interface.
2) Switch to Configuration > Network > Interface > Bridge, add a new Bridge Interface.
First we enable this interface and give it a name, place the available ports into the member
ports and make them become the member of this bridge interface. Moreover, don’t forget to
set the WAN IP information here since it is a “Bridge mode & Router (NAT) mode co-exist”
example and the NAT mode will need it. Here the bridge mode looks most likely a routing
bridge mode instead of the pure bridge mode. Thus, it needs an IP address. You may use the
same IP address that it used in the WAN interface, however you will get a warning message
like below.
If you got more than one IP, you can pick the other one here.
Przeglądanie stron 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 297 298

Komentarze do niniejszej Instrukcji

Brak uwag