ZyXEL Communications ZyWALL 70 Podręcznik Użytkownika Pobierz pdf (Strona 5)

ZyWALL 70 Internet Security Appliance

1.3 The Front Panel LEDs

The PWR LED turns on when you connect the power. The SYS LED blinks while performing system testing

and then stays on if the testing is successful. The ACT, CARD, LAN, WAN and DMZ LEDs turn on if the

corresponding connections are properly made. Refer to the following table for more detailed LED

descriptions.

LED COLOR STATUS DESCRIPTION

Off The ZyWALL is turned off.

Green On The ZyWALL is turned on.

PWR

Red On The power to the ZyWALL is too low.

Off The ZyWALL is not ready or has failed.

On The ZyWALL is ready and running.

SYS Green

Flashing The ZyWALL is rebooting.

Off The backup port is not connected. ACT Green

Flashing The backup port is sending or receiving packets.

Off The wireless LAN is not ready, or has failed.

On The wireless LAN is ready.

CARD Green

Flashing The wireless LAN is sending or receiving packets.

Off The LAN is not connected.

On The ZyWALL has a successful 10Mbps Ethernet connection. Green

Flashing The 10M LAN is sending or receiving packets.

On The ZyWALL has a successful 100Mbps Ethernet connection.

LAN

10/100

Orange

Flashing The 100M LAN is sending or receiving packets.

Off The WAN connection is not ready, or has failed.

On The ZyWALL has a successful 10Mbps WAN connection.

WAN-1/2

10/100

Green

Flashing The 10M WAN is sending or receiving packets.

1 2 3 4 5 6 7 8 9 10 ... 14 15

Brak uwag

ZyXEL Communications ZyWALL 70 Podręcznik Użytkownika Strona 5