Zyxel-communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNL Instrukcja Użytkownika Pobierz pdf (Strona 98)

100

101

P-2602HWNLI User’s Guide

98 Chapter 6 WAN Setup

Figure 47 More Connections Edit

The following table describes the labels in this screen.

Table 23 More Connections Edit

LABEL DESCRIPTION

Active Select the check box to activate or clear the check box to deactivate this node.

Name Enter a unique, descriptive name of up to 20 characters for this node. You can

use alphanumeric characters and the hyphen “-”, underscore “_” and @.

General

Mode Select Routing from the drop-down list box if your ISP allows multiple computers

to share an Internet account.

If you select Bridge, the ZyXEL Device will forward any packet that it does not

route to this remote node; otherwise, the packets are discarded.

Encapsulation Select the method of encapsulation used by your ISP from the drop-down list

box. Choices are PPPoA, RFC 1483, ENET ENCAP or PPPoE.

User Name (PPPoA and PPPoE encapsulation only) Enter the user name exactly as your

ISP assigned. If assigned a name in the form user@domain where domain

identifies a service name, then enter both components exactly as given.

Password (PPPoA and PPPoE encapsulation only) Enter the password associated with the

user name above.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 441 442

Komentarze do niniejszej Instrukcji

Brak uwag

Zyxel-communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNL Instrukcja Użytkownika Strona 98

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Zyxel-communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNL