ZyXEL Communications Prestige 623R-T Podręcznik Użytkownika Pobierz pdf (Strona 16)

Prestige 623R-T ADSL Dual-link Router

ZyXEL Prestige 623R-T1 Quickstart Guide for IOL Broadband – Page 16

n Testing the connection to the Prestige

1. Click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ping” followed by a space and the IP address of the Prestige

(192.168.1.1 is the default).

3. Press ENTER. You should see the reply messages displayed as shown. Your computer can now

communicate with the Prestige using the LAN or the USB port.

n Other Troubleshooting steps

PROBLEM SUGGESTED CORRECTIVE ACTIONS

The PWR and/or

SYS LEDs are off.

Make sure the Prestige is connected to the correct power adaptor, the power adaptor is

plugged into an adequate power supply and the Prestige power switch is turned on.

Turn the Prestige off and on. If the error persists, you may have a hardware problem. In this

case, you should contact IOL Broadband Technical Support.

The LAN 10/100M

LED won’t turn on.

Check the cable connection to the Prestige LAN 10/100M port.

Make sure your computer network card is working properly

The DSL LED is

off.

Check the connection between the Prestige DSL port and the telephone socket, including the

correct installation of ADSL Microfilters

C:\>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time=10ms TTL=254

Reply from 192.168.1.1: bytes=32 time<10ms TTL=254

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 10ms, Average = 2ms

C:\>

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Brak uwag

ZyXEL Communications Prestige 623R-T Podręcznik Użytkownika Strona 16