ZyXEL Communications ZyAIR Podręcznik Użytkownika Pobierz pdf (Strona 142)

ZyAIR B-3000 User’s Guide

141 Chapter 17 System Information and Diagnosis

17.2.2 Console Port Speed

Note: The console port is internal and reserved for technician use only.

You can set up different port speeds for the console port through Menu 24.2.2 – System

Maintenance – Console Port Speed. Your ZyAIR supports 9600 (default), 19200, 38400,

57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to select

the desired speed in menu 24.2.2, as shown in the following figure.

Figure 92 Menu 24.2.2 System Maintenance : Change Console Port Speed

Menu 24.2.2 – System Maintenance – Change Console Port Speed

Console Port Speed: 9600

Press ENTER to Confirm or ESC to Cancel:

After you changed the console port speed on your ZyAIR, you must also make the same

change to the console port speed parameter of your communication software.

17.3 Log and Trace

Your ZyAIR provides the error logs and trace records that are stored locally.

17.3.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error log. Follow

the procedures to view the local error/trace log:

1 Type 24 in the main menu to display Menu 24 – System Maintenance.

2 From menu 24, type 3 to display Menu 24.3 – System Maintenance – Log and Trace.

IP Address This is the IP address of the ZyAIR in dotted decimal notation.

IP Mask This shows the subnet mask of the ZyAIR.

DHCP This field shows the DHCP setting of the ZyAIR.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC

to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Table 51 Menu 24.2.1 System Maintenance : Information

FIELD DESCRIPTION

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 220 221

Brak uwag

ZyXEL Communications ZyAIR Podręcznik Użytkownika Strona 142